High-quality Hi-Fi cables for lossless signal transmission

Whether you need phono cables, subwoofer cables, digital cables or NF cables – the right connection is essential for the best sound quality. Our high-quality hi-fi cables ensure lossless signal transmission and maximum sound potential in your hi-fi setup. Discover high-quality solutions for detailed, dynamic and authentic sound.

*All cables in the High End Deluxe series are manufactured in our factory. Recognisable by the Made in Germany label on the product page.

Audio Cable | XLR

High End Deluxe Audio Cable Symmetrical 0,75 m | 1,0 m | 1,5 m

The elegant-looking HIGH END DELUXE audio cable impresses with its symmetrical design. The two copper conductors consist of fine, lacquered copper strands and are sheathed in foamed PE material. Two separate PE tubes additionally stabilize the cable. This cable architecture reduces unwanted capacitance to a minimum and ensures sound-neutral and low-loss signal transmission without placing unnecessary strain on the source.

From €424.00*

Audio Cable | RCA

High End Deluxe Audio Cable Symmetrical 0,75 m | 1,0 m | 1,5 m | Meterware

The high-quality HIGH END DELUXE audio cable impresses with its symmetrical design, which ensures optimum signal transmission. The fine, lacquered copper strands are surrounded by foamed PE material, while two separate PE tubes provide additional stability. This ingenious design minimizes unwanted capacitance and ensures sound-neutral, low-loss transmission. The signal source remains intact, ensuring excellent performance without additional strain.

From €149.00*

New

Audio Cable | XLR

Deluxe Audio Cable Symmetrical 0,75 m | 1,0 m | 1,5 m

The DELUXE stereo XLR audio cable has been specifically engineered for demanding high-fidelity applications and stands out with its balanced signal transmission for maximum sonic purity. Two identical copper conductors carry the audio signal, while a dedicated ground conductor enhances shielding – ensuring highly detailed, low-noise, and precise signal reproduction. Thanks to its high-quality PE (polyethylene) insulation, the cable's capacitance is significantly reduced, minimizing signal loss. The dual shielding – a combination of foil and braided shielding – provides reliable protection against electromagnetic interference, ground hum, and high-frequency noise, effectively eliminating common sources of audio degradation. The balanced XLR design uses two conductors with opposite polarity. Any interference picked up along the way is canceled out via differential mode rejection – delivering a clean, low-loss signal, especially over longer cable runs or in electrically noisy environments. The solid, overmolded XLR connectors ensure a secure connection and long-lasting contact integrity – issues like loose connections or dropouts are virtually eliminated. The sleek black fabric sleeve not only offers mechanical protection but also adds a premium look and ensures smooth handling. With an 8.0 mm diameter, the cable is both durable and flexible, making it easy to install. Sustainably packaged: The cable is delivered in an eco-friendly paper sleeve – minimalist, functional, and in line with the thoughtfully engineered design.

From €49.00*

Audio Cable | RCA

Deluxe Audio Cable OFC Copper | Coaxial Design 0,75 m | 1,5 m | 3 m

The DELUXE audio cable impresses with its high copper content, delivering a powerful and dynamic sound signature. Its dual shielding protects sensitive signals from external interference, such as that caused by smartphones or Wi-Fi routers. The dual-mono design ensures excellent channel separation and optimal electrical performance. Finished with slim yet solid full-metal connectors featuring a practical grip recess for easy handling.

From €47.29*

Phonocable | RCA

High End Deluxe Phonocable RCA 1,5m

The High End Deluxe Phono Cable from Eagle Cable has been specially developed for demanding applications between turntables and amplifiers. The particularly sensitive signals coming directly from the pickup benefit from optimal cable architecture: two parallel, identically constructed copper conductors made of finely lacquered 0.10 mm OFC copper strands transmit even the finest nuances and dynamics without distortion. Each conductor is individually insulated with foamed polyethylene (PE) – this material with microscopic air pockets minimises the cable's capacitance and thus protects the sensitive pickup. This keeps the music signal free, unimpeded and true to the original. Two additional PE tubes give the cable mechanics stability and ensure durability in daily use. To ensure that the music signal remains clear even with longer cable lengths, a high-density copper braid effectively protects against electromagnetic interference – background hum and external interference are reliably eliminated. The flexible sheath made of thin PVC, combined with an elegant textile braid, not only offers protection, but also pleasant handling and a high-quality appearance. Solid full-metal connectors (either RCA or SME) with permanently low contact resistance ensure a secure and low-loss connection to your components. All these features make the Eagle Cable High End Deluxe phono cable the ideal solution for vinyl lovers and discerning hi-fi enthusiasts who value lively, detailed sound reproduction and atmospheric depth – so that even the finest nuances and tonal shades of your record collection are reproduced authentically and emotionally by your amplifier, from the first note to the last.

€472.00*

Phonocable | SME 90°

High End Deluxe Phonocable SME 90° 1,5m

The High End Deluxe Phono Cable from Eagle Cable has been specially developed for demanding applications between turntables and amplifiers. The particularly sensitive signals coming directly from the pickup benefit from optimal cable architecture: two parallel, identically constructed copper conductors made of finely lacquered 0.10 mm OFC copper strands transmit even the finest nuances and dynamics without distortion. Each conductor is individually insulated with foamed polyethylene (PE) – this material with microscopic air pockets minimizes the cable's capacitance, thereby protecting the sensitive pickup. This keeps the music signal free, unimpeded, and true to the original. Two additional PE tubes give the cable mechanics stability and ensure durability in daily use. To ensure that the music signal remains clear even with longer cable lengths, a high-density copper braid effectively protects against electromagnetic interference – background hum and external interference are reliably eliminated. The flexible sheath made of thin PVC, combined with an elegant textile braid, not only offers protection, but also pleasant handling and a high-quality appearance. Solid full-metal connectors (either RCA or SME) with permanently low contact resistance ensure a secure and low-loss connection to your components. All these features make the Eagle Cable High End Deluxe phono cable the ideal solution for vinyl lovers and discerning hi-fi enthusiasts who value lively, detailed sound reproduction and atmospheric depth – so that even the finest nuances and tonal shades of your record collection are reproduced authentically and emotionally by your amplifier, from the first note to the last.

€472.00*

Mono subwoofer cable

High End Deluxe Subwoofercable RCA 2 m | 3 m | 5 m

The High End Deluxe Subwoofer Cable was specially developed for loss-free transmission of low-frequency audio signals. Its symmetrical design with two identically constructed, parallel copper conductors made of fine, lacquered 0.10 mm OFC copper strands ensures particularly low-interference signal transmission – so that even powerful bass frequencies arrive at the amplifier or active subwoofer clear, powerful, and defined. Each conductor is individually coated with a foamed polyethylene (PE) dielectric. This material uses microscopic air pockets to reduce the cable's capacitance to a minimum, which not only reduces signal loss and interference, but also puts hardly any strain on the source, such as your AV receiver. Two separate PE tubes stabilize the mechanical structure and make the cable durable and resistant. A dense copper braid surrounds the conductors and effectively protects the signal from electromagnetic interference – even with longer cable runs in demanding home or studio environments, the bass remains clean and unadulterated. The flexible, slim PVC jacket with elegant textile braiding ensures an unobtrusive appearance and easy installation. Precisely manufactured full metal plugs with high contact reliability guarantee a permanently low contact resistance for a stable connection. The Eagle Cable High End Deluxe Subwoofer Cable is therefore the perfect choice for all music lovers and home theater fans who value deep, controlled bass and authentic sound reproduction—for noticeable depth and precision with every playback.

From €199.00*

Mono Subwoofercable

Deluxe Mono Subwoofercable OFC Copper | Coaxial 3 m | 5 m | 8 m

This subwoofer cable impresses with its solid technology for clear bass reproduction in home cinema and hi-fi systems. The coaxial conductor design and conductors made of high-purity OFC copper, together with double shielding, ensure a clean, interference-free signal. This means that the bass reaches the subwoofer powerfully and precisely – without interference or loss. The robust full metal plugs ensure a permanently secure connection, while a flexible PVC jacket with additional fabric protection protects against mechanical stress and makes installation easier. With its attractive price-performance ratio, this cable is the ideal choice for uncomplicated yet high-quality subwoofer connections – even with longer cable lengths of up to 5 metres.

From €32.99*

Subwoofercable

Deluxe Y-Subwoofercable OFC Copper | Coaxial 3 m | 5 m | 8 m | 10 m

From €43.79*

Digital Cable Coax

High End Deluxe Digital cable Koaxial 0,75 m | 1,5 m | 3 m | Meterware

The High-End Deluxe digital cable was specially developed for low-loss and precise transmission of digital audio signals in SPDIF format. The coaxial design with a precisely matched characteristic impedance of 75 ohms ensures optimal signal transmission and minimises reflections or signal distortion – essential for error-free digital transmission. The solid inner conductor made of high-purity copper (OFC) offers excellent conductivity and supports stable impedance over the entire cable length. The conductor is surrounded by a high-quality foamed polyethylene dielectric (PE), which achieves a particularly low dielectric constant thanks to enclosed air bubbles – for reduced line capacity and good high-frequency properties. Quadruple shielding – consisting of two aluminium foils and two dense copper braids – effectively protects the signal from electromagnetic and high-frequency interference (EMI/RFI). This is particularly advantageous when laying this digital cable near live wires or other digital devices. The outer sheathing is made of flexible PVC for good kink resistance and protection during frequent movement. An additional, robust textile braid gives the cable mechanical stability and an elegant appearance. The solid full metal plugs with gold-plated contacts ensure corrosion-free, durable connections with low contact resistance – even with frequent plugging and unplugging.

From €13.99*

Digitalkabel Koax | Cinch

Deluxe Digitalcable 75 Ohm | OFC copper 0,75 m | 1,5 m | 3 m

This digital cable provides stable and precise transmission of digital audio signals with a defined characteristic impedance of 75 ohms – ideal for use between digital components such as CD players, receivers or DACs. The cable has double shielding consisting of a metal foil and copper braiding, which effectively protects the signal from electromagnetic interference and hum. The conductors are made of high-purity OFC copper, which ensures good conductivity and clean signal transmission. Robust full metal plugs guarantee a reliable connection with low contact resistance. The flexible PVC jacket, combined with a protective textile braid, makes the cable durable and easy to install. This makes it the practical and cost-effective choice for clean digital signal transmission – without compromising on sound quality.

From €23.69*

Digitalkabel Opto

Deluxe Opto cable TOS-Link | Mini Plug 0,75 m | 1,5 m | 3 m | 5 m | 10 m

This high-quality optical cable transmits digital audio signals loss-free via light pulses – ideal for connecting TVs, soundbars, AV receivers, or other hi-fi components with optical inputs or outputs. The precision-manufactured nylon conductor ensures particularly high light conductivity and thus reliable, interference-free signal transmission – without any electrical interference or grounding problems. The Toslink connectors comply with the standard format and guarantee a secure, compatible connection to all common devices. The robust metal connector housings provide lasting protection for the sensitive optical contacts and ensure a stable connection even with frequent reconnection. A mini jack adapter is also included in the scope of delivery – ideal for portable audio devices or notebooks with a mini Toslink connection.

From €39.09*

Digital Optocable

TOS Link -> TOS Link High Standard 0,75 m | 1,5 m

This optical digital cable is ideal for loss-free transmission of digital audio signals between devices with a Toslink connection, such as TVs, soundbars, AV receivers, or game consoles. The plastic fiber optic cable ensures reliable signal transmission at typical cable lengths for home use. The flexible PVC insulation protects the cable from mechanical stress, while the molded connectors enable a simple, secure connection to the devices. A practical solution for everyday use – simply connect and enjoy digital audio without interference.

From €16.49*

Absorber Plate

Deluxe Absorber Material: all metal 30 x 5 mm (D x H)

These high-quality sub-frequency absorber made of aluminum effectively dissipate vibrations and improve the sound quality of devices and speakers by minimizing disruptive resonances. Thanks to the practical adhesive pads, they can be easily attached to the surface and provide a stable hold.

€21.99*

DAC Audio Converter

Deluxe D/A-Converter 48kHz | 24Bit 50 x 34 x 40 mm

This DAC (digital-to-analog converter) reliably converts digital S/PDIF audio signals (optical or coaxial) into an analog stereo RCA signal. It is ideal for connecting modern source devices such as televisions, CD players, or streamers to amplifiers or active speakers that only have analog inputs. The converter supports a sampling rate of 48 kHz at 24 bits, offering excellent sound quality. Thanks to its compact design, the device can be discreetly integrated into any setup. Power is supplied flexibly via the included 5V power supply (100–240 V AC input). CE and RoHS compliant.

€73.69*